This Hilti Combi Hammer is suitable for use in concrete, masonry and natural stone. It can drill through holes up to 15cm in diameter.
It can also be used for heavy chiselling with pointed, flat, wide flat, mortar or brushing tools.
The TE 80 model has the best performance to weight ratio in the 10kg class.
It has an optimised safety clutch an the centre of gravity is close to the grip for added user safety.
|Power Range||1700 w|
|Dimensions L x w X H||55.4 cm x 12.5cm x 31.2cm|
|Single impact energy as per EPTA May 2009||11.5 J|
|Speed 1 ( no load)||380rpm|
|Mains Frequency||50 -60 Hz|
|Triaxial Vibration value for hammer drilling into concrete||8.8 m/s²|
|Uncertainty (K) for triaxial vibr. val. for chiselling (ah,CHeq)||1.5 m/s²|
|Triaxial vibration for chiselling (concrete)||8.5 m/s²|
|Maximum drilling diameter for hammer drill bits – range||12 mm - 40 mm|
|Radio and television interference suppression||Yes|
|Drilling modes||Drilling Hammer drilling Chisel setting Chiselling|
|Triaxial vibration value for drilling into metal (ah,D)||2.9 m/s²|
|Uncertainty (K) for triaxial vibr. val. for drilling into metal (ah,D)||1.5 m/s²|
|Speed 2 (no load)||250 rpm|
|Uncertainty for the given sound level acc. EN 60745||3 dB (A)|
|Optimum drilling diameter in concrete||22 mm - 40 mm|
|A-weighted emission sound pressure level acc. EN 60745||99.5 dB (A)|
|A-weighted sound power level acc. EN 60745||110.5 dB (A)|
|Number of gears||2|
|Approvals||UL/CSA 60745-1 UL/CSA 60745-2-6|
|Service indicator light||Yes|
|Interference immunity||Acc. to EN 55014-2|
|Hammering speed (under load 100%)||2760 impacts/minute|