The above hire rate does not include wear on diamond flails, transformers, extension leads or concrete vacuums which you may or may not require.
The BEF 200 Multiplane range of products are strong and reliable with modern, clean lines which will appeal to the image conscious company. Close attention to detail has resulted in an efficient machine with optimum weight distribution ensuring a high work rate. Every component is carefully designed and field tested for strength and durability.
The BEF 200 Multiplane range is safe and simple to operate with no exposed moving parts. Each machine is supplied with a comprehensive operating and maintenance manual containing all the information needed to ensure that the BEF 200 always performs to its full potential.
Maximum Cable. The machine has a 14m cable on it. An extra 7m x 32amp x 4mm cable can be added to that to give a maximum working distance of 21m. Attempting to extend this further will cause damage to the electrical motor.
Applications
- Cleaning and texturing concrete and asphalt.
- Removal of paint, rust, grease, ice deposits, line markings and concrete laitance.
- Concrete reduction and scabbling.
- Removal of roof chippings.
- Grooving applications.
- Cleaning concrete formwork and shuttering.
- Non-slip finishes.
- Removal of concrete and plaster droppings.
| Specifications | |
| Type | Electric |
| Power Output | 3 Hp |
| Cutter Head Speed | 1753 rpm |
| Cutter Working Width | 200mm |
| Working Distance From Wall | 45mm |
| With BEF 60 | 5 -8 MM |
| Motor Speed | 2870 rpm |
| Voltage | 110 v |
| Cycles | 50 Hz |
| Phase | Single |
| Plug Size | 32 amp 3 Pin |
| Cable Size | 4.0 mm 3 Core |
| Max Cable Length | 25 m |
| Transformer | 5 kva |
| Generator | 8 kva |
| Machine Length | 940mm |
| Machine Width | 340mm |
| Machine Height | 905mm |
| Machine Weight | 54kg |
