This versatile hand held scaler can be used for many tasks including scabbling concrete and stone, keying back plaster and render, removing paint and textured coatings etc.
Refina EPf1503 6" SURfACE SCABBLER 110v
Fast surface scabblers with adjustable depth dust control hood leaves peened & roughened surface dust free with vac
The EPF1503 is a versatile surface scabbler that will clean and key concrete, render and masonry; it will remove high build coatings, masonry paints, tyrolean and strip waterproofers; prep internal walls and plaster before repainting or finishing. It is the ideal power tool for internal and external renovation, refurbishment and redecorating. The C4 tungsten cutters come supplied and are for removing thin and thick coatings; the surface is “shaved” clean.
In addition you can also order C5 cutters which are for use on trowelled surfaces and sand finish brick and masonry. Please select C5 cutters below
The EPF1503 can also be fitted with a coarse grit 6" tungsten chip disc for abrading walls and floors. Coarse grit tungsten chip cup discs are an alternative to very coarse sanding discs. They are durable, clog less and can be cleaned with a wire brush The 6" disc will fit the EPF1503; a locknut and flange is required. Please select 6" disc and locking nut below.
Vibration level: 25m/hr 5.9m/s
Noise level: 78dBA
Voltage: 110v or 230v
Transformer: 3kva, 16 amp plug