Categories
Your Cart

Cobra Ducting Reel 150m

Cobra Ducting Reel 150m
Cobra Ducting Reel 150m
€20 per day +VAT
€60 per week +VAT

Continuous pipe and duct rodding systems, often referred to as cobra rods, conduit snakes, duct rods or conduit rods, give a compact and labour saving solution when installing duct ropes or testing ducts.

The two main uses for Cobra Rodding Systems are:

  1. To push a sonde through a duct or pipe to track it’s course with a cable avoidance tool.
  2. To put through a duct to bring back a draw string to pull a winch rope through the duct.

If used with a sonde, unless it is a mini-sonde, select a cobra a diameter larger than would usually thought appropriate for the length. This will give a heavy sonde more support.

Before pushing the cobra through the duct, slacken the brake handle enough to allow the reel to rotate but retain sufficient drag to prevent over-run and excess rod to come off the reel.

As you feed the rod into the duct, check the outer polypropylene for damage from previous usage.

Features

  • Rod housed in a sturdy metal frame with an integral brake. Simply rotate the wheel to guide the rod down the duct.
  • Compact construction: Easy to transport.
  • Provided pre attached with bullet pulling eye.
Specifications
Rod Length150 m
Rod Diameter14mm
This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.