The DC 2900a is our most popular Class H dust extractor. It is suitable for vacuum cleaning and source extraction from handheld power tools including drills, hammer drills, combi hammers and mini grinders (with up to 125mm suction casings) and small table saws. The DC 2900a dust extractor has a sturdy steel dust container with big wheels but still lightweight and portable.
Dust emissions can be reduced by almost 100% when this machine is used with a suitable suction casing.
This dust exactor can also be used for site sweeping and vacuuming. The dust is collected into an easy to change bag at the bottom of the machine. By using this machine airborne dust and pollution are kept to a minimum on work sites.
The filters are HEPA 13 and it has cyclone separation and an open inlet flow of 190m3/hr.
|Max Q, m3/h||190|
|Max vacuum inwg/kPa||84 / 21 / 24|
|Sound Level||68 db ( A)|
Please note: This tool is not to be used for asbestos removal or cleaning where asbestos is likely to be found.