The C Scope cable avoidance tool is a high performance locater which uses digital signal processing technology.  It is the tool of choice for determining the exact location of buried pipes and cables when carrying out excavation work.

This model has an extra detecting mode ( AllScan)  which improves signal interference rejection.  The information about the position of buried pipes and cables can now be accessed faster.

When combined with a C.Scope SGA or SGV Signal Generator and accessories, the CXL cable avoidance tool becomes a versatile, all round pipe and cable locating and tracing package.  It has an LCD meter with an automatic backlight, , detachable loudspeaker and easy-to-use fingertip controls.

There are four detecting mode

1. Power Mode

This is the quickest way to detect most buried electricity cables by detecting the signal created by the electrical current itself.

2. Radio Mode

This mode detects re-radiated “radio” type signals that are often present on metal pipes and cables allowing their position to be determined using just the CXL alone.

3. Generator Mode

This is used to detect the signal applied to a metal pipe or cable by a C.Scope SGA or SGV Signal Generator. The Generator mode can also be used to detect the signal being transmitted by a C.Scope Sonde for non-metallic pipe tracing.

4. Allscan Mode

This new mode detects all frequencies of signal from the lowest of the power signals right up to and including 33kHz. It is an all-in-one mode which can detect unusual frequency signals often overlooked in other modes. This can often speed up the locating process with just one sweep of the site.