Categories
Your Cart

Crane and Fork Attachments

Crane and Fork Attachments

Crane and Fork Attachments
Mechanical Block Grab, designed to lift 2 stacks of 44 blocks, 88 blocks in total in one lift. The BG88 grab is a fully certified grab used for handling common building packs of blocks, bricks and kerbs up to a SWL of 2200kg. FeaturesSuitable for common building packs of blocks, bricks and..
€0
Ex Tax:€0
Mechanical block grabs, ideal for building and construction sites. Designed to lift a number of materials such as bricks, blocks, kerb stones and paving blocks, they can be used with cranes, forklift trucks, telehandlers and excavators. Our block grabs are fully mechanically operated the driver ..
€0
Ex Tax:€0
Crane Skips are ideal for handling a wide range of waste products including steel, timber, muck and rubble. The main advantage of this type of skip is the comparatively low loading height compared with a conventional muck skip. Designed with the automatic locking system on the drop-down bale arm f..
€0
Ex Tax:€0
This compact concrete cone is designed for use with a forklift, teleporter or to be lifted by a crane via lifting eyes. It has fork pockets to accommodate  a forklift from 4 positions and has an easy to use lever -operated trap. At only 1.1m wide at the discharge point, this compact skip will..
€0
Ex Tax:€0
These professional contractor rollover concrete skips are used for pouring concrete into columns or narrow formwork and are often used where access is difficult. Constructed of an extra heavy duty and rugged design they have a pull rope for opening the discharge gate. The end of the opening operat..
€0
Ex Tax:€0
These tipping skips fit all types of forklift trucks and have been designed specifically to save time, money and improve safety. The skips will handle virtually any bulk material. All skips have automatic self-locking return, a safety spring on the tip mechanism and safety pins to prevent movemen..
€0
Ex Tax:€0
Suitable for handling steps, kerb stones etc. in conjunction with a lifting device.Easily adjustable opening width by means of a spring-loaded bolt. Considerable inside height. Conical kerb stones are also gripped securely, as the gripper has an inside height of 185 mm (7¼ inch) thus being ..
€0
Ex Tax:€0
The Man cage work platform is designed for use with fork lifts and telescopic handlers to elevate persons to work at heights. Work platforms such as this should only be used for occasional use, where self propelled work platforms are not available. These Work platforms should only be used on goo..
€0
Ex Tax:€0
Showing 1 to 8 of 8 (1 Pages)
This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.