NO.0 ACROW PROP
Adjustable steel props, commonly referred to as Acrow Props, are specifically designed to provide temporary support for walls and ceilings
Fully adjustable from 1.05m up to 1.83m
Safe Working Load of 42kN at 1.05m through to 22kN at their maximum height of 1.83m
Weight 13 kg..
NO.2 ACROW PROP
Strong adjustable steel props used to support ceilings, walls and floors.
They are available in various sizes with an adjustment range for each size.
They are suitable for use with strongboys.
Fully adjustable from 1900 mm up to 3400 mm.
Safe Working Load of 39 KN at 1900 mm t..
NO.3 ACROW PROP
Trusted by the trade, our Acrow Props have a multitude of uses from supporting RSJ’s and lintels to supporting load-bearing walls while new openings are formed,
you can rely on our props to do the job.
Fully adjustable from 2.17m up to 3.9m
Safe Working Load of 35kN at 2.17m t..
Please Note This Item Requires a Bitumen Burner which is hired at an additional cost
Ideal for heating small quantities of bitumen
Tar Boiler 15gallon with Tap
Removable inner tank
Fully enclosed burner bracket
Our burners are high efficiency units made from steel with no mesh to block.
Radial flame control ensures even and efficient heating without burning out the pan base.
Easy to service and clean. Standard burner output 30 kw.
Hose is armoured with a protective steel mesh covering and all fitt..
The Propane Roofing Torch has a single head mounted on a 600mm neck attached to a regulation trigger.
The torch is for use with Propane gas to heat roofing materials or could be used to burn weeds and unwanted vegetation without chemicals.
Also great for melting snow, thawing metal pipes and hea..
These rubbish chute sections are ideal to remove wasted and rubble from high level.
They are 1.2m in length and link together via chains to form the required overall length of chute.
May be used with Top hopper and Side entry sections.
Standard Rubbish Chute is an ideal way of transferring debr..
Strongboys are used for placing between a course of brick or block walls and supported with building acrow props to enable the wall to be removed.
They support walls while lintels, beams or RSJ's are fitted. They can be hammered into mortar joints and supported by a single prop, allowing masonry et..