The C.Scope Cable Avoidance Tool is the classic, industry standard Locator to use to determine the exact location of buried pipes and cables immediately prior to any form of excavation work taking place.
Hitting and damaging buried services when excavating is costly and potentially very dangerous...
The C.Scope SGA and C.Scope SGV Signal Generators operate in conjunction with a C.Scope Cable Avoidance Tool or Cable Avoidance Tool operating in the Generator mode.
The Signal Generators generate a 33kHz signal which can be applied to a cable or metal pipe to allow it to be traced.
A range of acc..
The C.Scope 33KHz Sonde is a small battery powered transmitter which, in typical use, would be screwed onto the end of a drain rod (a range of drain rod adaptors are available),
and pushed down a pipe so that the pipe direction can be traced using the C.Scope locator set to 'Signal Generator Mode'..
Continuous pipe and duct rodding systems, often referred to as cobra rods, conduit snakes, duct rods or conduit rods, give a compact and labour saving solution when installing duct ropes or testing ducts.
The two main uses for Cobra Rodding Systems are:To push a sonde through a duct or pipe to ..
The Cabletiger Maxi Duct Rodder is ideal for installation of optical fibre telecom cables in buried/underground HDPE ducts up to 250 meters in congested city environments.
The Cabletiger maxi duct rodder is also the most widely used equipment in OFC maintenance and where cable-blowing method is no..
Cobra cable reels can be used for installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras. .
Rodding reels can also be used for attaching a sonde (mouse) for pipe tracing with a Cable Avoidance Tool..
The rodding reels are made from a stable plastic mat..
The CS880 is a neat solution to the problem of pinpointing the position of metal covers buried under earth or tarmac.
The Metal Cover Locator has been designed specifically for the exacting requirements of the water industry and ground working contractor.
This detector is a low cost solution to th..
This camera helps you see in places where your eyes can't go: behind walls, inside pipes and drains, around blind corners.
The secret to getting the lens where it needs to go is what I call the snake.
The snake is a durable 3 foot, water-tight, flexible cable armed with a 17 mm camera.
The CS440XD is a lightweight professional format metal detector with a variable discrimination which will simply eliminate signals from rubbish targets.
It is ideal for locating lost wedding rings in woods or long grass, missing valuables on sandy beaches and pirate treasure wherever it may lie.
This rebar pipe locator is a very versatile detector.
It has been designed for fast and accurate diagnosis and has a built-in display for easy location of objects.
It can be used to detect the following objectsCopper and aluminium
Wood and plastic objects