These 29kw indirect fired heaters are perfect for providing temporary heating solutions to a range of structures, places of worship and indoor events.
Due to the enclosed chamber of indirect heaters, they produce large volumes of clean, warm dry air for heating large spaces such as halls, marquees and areas where people are present.
This also means that there is no flame, so the heated air can be ducted, enabling units to be placed away from the area to be heated.
This type of heater is also ideally suited to places where ventilation is limited or there is a risk to combustible materials.
Indirect heaters can also be used for drying applications and for best results use in conjunction with dehumidifiers.
It has an output of 29kW (99,000 BTU/hr) and has a 42l fuel tank which allows for 12hrs continuous use before refilling. The indirect heater comes with a 7m duct hose
Depending on outdoor temperature, the current temperature in the room and the required rise in temperature, the insulation of the structure (Office v Warehouse v Marquee) , we would tend to say this heater is suitable for a typical heated area 650 - 750 m3
Suitable for
- Building Sites
- Retail and car showrooms
- Exhibition halls
- Marquees
- Agricultural Locations
- Warehouses
- Garages
- Sports halls and leisure centres
- Churches
- Factories
- Small Workshops
- Offices
- Supermarkets
- Schools, Colleges and Universities
| Specifications | |
| Heater Dimensions | 1215mm x 440mm x 670mm |
| Weight | 48kg |
| Heating Capacity | 29 kw |
| Heat Efficiency | 84.6 % |
| Air Flow | 1150 m³ / hr |
| Air Temperature | 75℃ |
| Fuel Consumption | 2.7 l / hr |
| Tank Capacity | 42 litres |
| Electrical Power | 370 w |
| Runtime Constant Per Tank Of Fuel | 12 hours |
