€60 per week +VAT
Although small in size, these are the most powerful single phase heaters on the market today. There is not a more powerful heater that you can plug into a standard house socket.
Capable of being able to duct an impressive 5m, this unit offers 3kW of clean, dry heat from a tough steel body that's built to keep going. No fumes, no carbon monoxide risk.
In a winter flood situation, they are the ideal complement to our dehumidifiers to get an area up to a workable temperature.
Available in either 110v or 230v supply.
If you hire / are using the 110v, heater it must only be used with a vented transformer
This Heater comes as standard with a 1.5m cable.
As with all electrical heaters, the shorter the cable, the more efficient they are. This heater will not work off anything longer than 7m of cable.
These heaters are black element heaters which means that they increase the temperature of the air gradually, they do not blast out heat.
For this to be effective the heater needs to recirculate the heated air.
If the area is too large the heater will not be able to recirculate the air before it has cooled down preventing the heater from having much impact
Depending on the outside temperature and the size of the area to be heated, you may need multiple units.
|Well Insulated - House||46 sqm|
|Average Insulation - Portakabin||42 sqm|
|Badly Insulated - Warehouse||19 sqm|
|Poorly Insulated - Marquee||14 sqm|
- Building sites
- Marquees and tents
|Power Supply||230 v 13 amp or 110 v 32 amp 1 ph 50 Hz|
|Max Heat Capacity||2625 kcal|
|Noise Level 1 metre||max 50 dbA|
|Noise Level 3 metre||max 45 dbA|
|Plug Type||BS1363 230 V or BS4343 32 amps 110 v|
|Dimensions H x W x D||320mm x 300mm x 330mm|
|Power Consumption||max 2.8 kw /hr|