This powerful disc floor sander from Hiretech is an easy to use machine. It has a bias off switch and to reduce the dust in the work area, disposable paper dust bags may be attached.
The sanding pad is driven by a four brush motor and the drive gear is a hardened steel alloy pin and large diameter aluminium bronze mechanism. This ensures that the sander will not stall or slow down when used with course abrasives, removing old surface finishes or deposits of wax and dirt.
To improve user safety and reduce damage to base boards, pipework and other exposed work surfaces, there is a deep rubber edge around the whole circumference of the disc. This means that this sander can be used in confined spaces such as cupboards, stair treads and sanding right up to the edge of the floor.
This sander is suitable for both hard and soft wood floors, including parquet floors. It can also be used on some types of decking, fibre board, cork and composition floors.
For more information about how to use this edging sander, see our user instruction leaflet
Specifications | |
Power Supply | 220 V / 110 V |
Off Load Current | 220 v = 5amp , 110v = 8amp |
Noise | 100 dB at 1 metre |
Vibration | 2.71m / s2 r.m.s |
Motor | 13500 rpm |
Disc Size | 178mm |
Dimensions W x D x H | 39cm x 32cm x 35cm |
Weight | 18kg |