The drill positioner kit is used to enable the user to line up drilling positions from two sides of a thick concrete slab or wall. This is especially useful to predict drill bit exit point if there are services/obstructions or other possible strikes mounted on one side, or if drilling from two sides may be required due to bit length.
The position accuracy is ± 8mm on a 200 mm thick wall and the units will detect one another up to 1.35 metres apart. Because of this they can be used to determine thickness of a wall or slab from two sides without the need to drill through or use a more expensive scanning solution. Accuracy for thickness measurement is ± 5%.
We would not recommend relying on these results for reinforced concrete due to the negative affect reinforcement can have on the distance results.
| Specifications | |
| Operating Temperature Range | -20 - 55 °C |
| Maximum Operating Time | 17 h |
| Working Temperature Range | -20 - 55 °C |
| Dimensions Reciever | 210 x 95 x 33 mm |
| Dimensions Transmitter | 210 x 95 x 33 mm |
